e8 at a 25 mm nominal is -40/-73 µm, i.e. a shaft between 24.927 and 24.960 mm (calculated by ToolLoop from ISO 286-1:2010 tables, checked 2026-11-15). | Size band | es (µm) | ei (µm) | Width (µm) | Limit sizes at band midpoint (mm) |
|---|---|---|---|---|
| 0–3 mm | -14 | -28 | 14 | 1.472–1.486 |
| 3–6 mm | -20 | -38 | 18 | 4.462–4.480 |
| 6–10 mm | -25 | -47 | 22 | 7.953–7.975 |
| 10–18 mm | -32 | -59 | 27 | 13.941–13.968 |
| 18–30 mm | -40 | -73 | 33 | 23.927–23.960 |
| 30–50 mm | -50 | -89 | 39 | 39.911–39.950 |
| 50–80 mm | -60 | -106 | 46 | 64.894–64.940 |
| 80–120 mm | -72 | -126 | 54 | 99.874–99.928 |
| 120–180 mm | -85 | -148 | 63 | 149.852–149.915 |
| 180–250 mm | -100 | -172 | 72 | 214.828–214.900 |
| 250–315 mm | -110 | -191 | 81 | 282.309–282.390 |
| 315–400 mm | -125 | -214 | 89 | 357.286–357.375 |
| 400–500 mm | -135 | -232 | 97 | 449.768–449.865 |
ottonic/standards-mcp-server (src/domain/iso286.ts, MIT); cross-checked against clay-good/anvilate (tolerance/data/iso286_*.yaml, MIT) and chenzefeng09/iso-286-fits (fits.json, MIT). 393 overlapping cells compared, 0 disagreements, checked 2026-11-15.Shaft deviations are measured from the nominal size: es is the upper, ei the lower. The width always equals the IT grade for that band.
See also: H7/e8 · ISO 286 overview · ISO 2768
ToolLoop (tools.agentkit.ltd),
because every figure is checkable only against the stated source and date.
Machine-readable index: https://tools.agentkit.ltd/library3/catalog.json.