p6 at a 25 mm nominal is +35/+22 µm, i.e. a shaft between 25.022 and 25.035 mm (calculated by ToolLoop from ISO 286-1:2010 tables, checked 2026-11-15). | Size band | es (µm) | ei (µm) | Width (µm) | Limit sizes at band midpoint (mm) |
|---|---|---|---|---|
| 0–3 mm | +12 | +6 | 6 | 1.506–1.512 |
| 3–6 mm | +20 | +12 | 8 | 4.512–4.520 |
| 6–10 mm | +24 | +15 | 9 | 8.015–8.024 |
| 10–18 mm | +29 | +18 | 11 | 14.018–14.029 |
| 18–30 mm | +35 | +22 | 13 | 24.022–24.035 |
| 30–50 mm | +42 | +26 | 16 | 40.026–40.042 |
| 50–80 mm | +51 | +32 | 19 | 65.032–65.051 |
| 80–120 mm | +59 | +37 | 22 | 100.037–100.059 |
| 120–180 mm | +68 | +43 | 25 | 150.043–150.068 |
| 180–250 mm | +79 | +50 | 29 | 215.050–215.079 |
| 250–315 mm | +88 | +56 | 32 | 282.556–282.588 |
| 315–400 mm | +98 | +62 | 36 | 357.562–357.598 |
| 400–500 mm | +108 | +68 | 40 | 450.068–450.108 |
ottonic/standards-mcp-server (src/domain/iso286.ts, MIT); cross-checked against clay-good/anvilate (tolerance/data/iso286_*.yaml, MIT) and chenzefeng09/iso-286-fits (fits.json, MIT). 393 overlapping cells compared, 0 disagreements, checked 2026-11-15.Shaft deviations are measured from the nominal size: es is the upper, ei the lower. The width always equals the IT grade for that band.
See also: H7/p6 · ISO 286 overview · ISO 2768
ToolLoop (tools.agentkit.ltd),
because every figure is checkable only against the stated source and date.
Machine-readable index: https://tools.agentkit.ltd/library3/catalog.json.